POLYKEN 930 Joint Tape For Pipe Joints &Fittings

System Description

POLYKEN^® 930 Pe Butyl Rubber Tape is a cold applied tape coating system designed for the corrosion protection of field joints, fittings, and specialty piping.Pipe Protection Tape unique adhesive retains conformability over a wide temperature range, yet exhibits an elevated level of shear resistance, which Rubber Coating Tape is a key in-ground performance characteristic. Coupled with a pliable, very malleable polyethylene backing, this versatile tape system can be applied by hand or with a wrapping machine.

Features

-Heavy duty adhesive. Ensures a strong bond & impervious seal. -Conformable to irregular shapes. Offers a solution for nearly every application. -No release liner. Makes installation fast and easy.

- Cold applied -Complies with ASTMD 1000,AWWA C 214&209. -Reliable, high-performance corrosion protection. -Compatible with generic plant coating systems. -Compatible with PE,FBE,TAPE &COAL TAR coatings.

Properties

PRODUCT PROPERTIES	TEST METHOD	TYPICAL VALUE
		POLYKEN 930-35	POLYKEN 930-50
Tensile Strength	ASTM D1000	40 N/cm	50N/cm
Elongation	ASTM D1000	300%	350%
Peel Adhesion to Primed Steel	ASTM D1000	25 N/cm	32N/cm
Water Vapor Transmission Rate	ASTM E 96	0.03
Water absorption At+23℃	ASTM D570	0.07%
Volume Resistivity	ASTM D 257	2.5 x 1015 ohm.cm
Dielectric Strength	ASTM D149	30 kv	32kv
Application Temperature		-20 to + 75℃
Max serve temperature		-40 to + 80℃
Color		Black , White

Ordering Information

POLYKEN^® 930 coating tapes are in roll form.

Eg.: POLYKEN^® 930-35 BLK 4"×50'

POLYKEN 930	Product Model No.	Standard ordering options
35	Total tape thickness in mils	35mils(0.89mm),50mils(1.27mm)
BLK	Tape backing color	Black (BLK),White(WHI)
4	Tape width in inches	2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm)
50	Tape roll length in feet	50ft(15M),100ft(30M)

***Special Roll Size can be customized .

Material Calculation Formula :

(Width of Coating in inches) ×(Area of pipe in square feet)*

----------------------------------------------------------------------------=Squares **of Coating Required

(Width of coating in inches-Overlap in inches) ×100

*Area of pipe in square feet=(Diameter in inches)/12×3.1416×(Length in feet)

**One square=One hundred square feet=9.29 square meters

(Width of Coating in mm) ×(Area of pipe in square meter)*

-------------------------------------------------------------------------------=Square meter of Coating Required

(Width of coating in mm-Overlap in mm)

*Area of pipe in square meter=(Diameter in mm)/1000×3.1416×(Length in meter)